Rechercher dans ce blog

Sunday, January 17, 2021

Street Barricades: Urban Scourge or Opportunity for a Bikeable St. Louis? - nextstl.com

You know the feeling. You’re driving down a quiet street in St. Louis City, and everything seems normal. Then BAM! The street is blocked by a row of bland concrete planters. “Damn Schoemehl pots,” you grumble to yourself as you turn around and search for a different route.

Schoemehl pots blocking a car on a St. Louis street. Photo by Colter Peterson of the St. Louis Post-Dispatch.

If you’ve ever wondered why St. Louis has so many of these seemingly arbitrary street barriers, you’re not alone. For those who grew up in St. Louis or have lived in the city for a while, encountering random street closures may just be an expected part of life in the city. You probably know where all the blocked streets in your neighborhood are and how to avoid them. But these types of tactical street barriers do not exist in other cities, at least not to the extent that they do in St. Louis.

And they are all over the place! Saint Louis University sociology professor Dr. Chris Prener has documented St. Louis’ street barriers in his projectStreet Not Thru: St. Louis Barriers Project,” finding 325 discontinuities in the city’s street grid created by such barriers. Putting Prener’s data on the map makes it clear that these barriers are not distributed equally around the city.

Locations and density of street barriers in St. Louis. Dark blue indicates a high spatial concentration of street barriers. Street barrier data from Dr. Chris Prener obtained here.

The locations of street barriers are not an accident. Barriers have been installed for various purposes, including traffic calming, crime prevention, fostering a sense of neighborhood ownership, and others. Many of St. Louis’ street closures are also unfortunately rooted in racism and classism. This is particularly true for barriers along Delmar Boulevard which have undoubtedly been placed to prevent the movement of people between the overwhelmingly Black and lower-income neighborhoods of north St. Louis and the wealthier, whiter central corridor.

Schoemehl pots and a gate blocking Lake Ave, just south of Delmar Blvd in the Central West End.

The Controversy of Schoemehl Pots

Schoemehl pots have not been installed without controversy. They first started showing up on city streets in the 1970s, when city leaders discovered that sections of concrete sewer pipe could be turned into large, virtually immovable planters at very little cost. Former mayor Vince Schoemehl, for whom the pots are named, was a big fan of street barriers and believed using them to block through traffic on residential streets would help calm traffic and provide an increased sense of neighborhood ownership. Other city leaders also believed closing streets could help reduce crime and combat population loss, which remain major concerns to this day. The Schoemehl administration alone closed over 100 streets with Schoemehl pots during Schoemehl’s 12 years in office, and many more barriers have since been placed.

Geometric concrete bollards block Chouteau Ave where it splits off from Manchester Ave in front of the Chroma apartments in Forest Park Southeast. Placed in 2019, this is one of St. Louis’ most recently installed street barriers.

Street barriers are now a mainstay of city life in St. Louis, but they remain controversial for many reasons. For one, many of them seem to be monuments to racism and classism. There is also little evidence that they actually prevent crime. Street barriers can arguably hinder crime-fighting efforts, as they block street access to police vehicles and there is no official city database of barriers that first responders can reference. Fire and EMS personnel may also find their preferred routes blocked. Additionally, some people feel that street barriers cause drivers to become frustrated, leading them to drive faster and more aggressively on nearby streets in an effort to make up for time lost by having to find a different route.

The Untapped Potential of Schoemehl Pots

Regardless of what one thinks about Schoemehl pots (and opinions do vary greatly), it seems like they are here to stay for the foreseeable future. Many residents of blocked streets appreciate Schoemehl pots’ traffic calming effects, and many city leaders continue to believe (falsely, I would argue) that they are an effective solution to the city’s crime problems. Perhaps it would be best to remove all of them and restore full connectivity to the urban street grid. But if we are honest with ourselves, that will not happen. Instead, we should focus our energy on rethinking the city’s street barriers to turn them into something more useful and less divisive.

In Fall 2019 I took a class in my urban planning program called Planning for Walking and Bicycling, and for the final project the professor let us do virtually anything we wanted (as long as it related to active transportation). While thinking about my project topic, I came to the realization that Schoemehl pots and the other street barriers around St. Louis City already kind of form the basis of a bicycle boulevard system.

If you are unfamiliar with the term “bicycle boulevard,” the National Association of City Transportation Officials (NACTO) provides a great definition:


“Bicycle boulevards are streets with low motorized traffic volumes and speeds, designated and designed to give bicycle travel priority. Bicycle Boulevards use signs, pavement markings, and speed and volume management measures to discourage through trips by motor vehicles and create safe, convenient bicycle crossings of busy arterial streets.”

-NACTO Urban Bikeway Design Guide

Schoemehl Pot Bicycle Boulevards

Elements of the built environment that block through traffic fall under “speed and volume management measures,” and as we already know, St. Louis has plenty of these! Many of the city’s existing street barriers already unintentionally do what NACTO recommends for bicycle boulevards. For example, one way to divert through traffic from bicycle priority streets is to force a right turn.

NACTO example of using simple infrastructure to divert automobile traffic from designated bike boulevards by forcing right turns for cars.
A row of Schoemehl pots placed diagonally across the intersection of Whittier St and McPherson Ave in the Central West End. Drivers approaching the intersection from the north or south along Whittier St must turn right onto McPherson Ave.

In the example above, simply increasing the space between Schoemehl pots to 4-6 feet would allow bicyclists to travel through the intersection comfortably while restricting automobile through traffic.

Another volume management design element NACTO recommends is full closure of a street access point to cars. Sound familiar?

NACTO example of using simple infrastructure to fully block through access to cars while leaving space for bicyclists to easily move through.
Concrete spheres blocking through access to Arco Ave at the intersection with Newstead Ave in Forest Park Southeast.

In the above example, the concrete spheres block car access to Arco Ave from Newstead Ave, and spacing them a bit further apart would make it very easy for bicyclists to get through.

The possibilities for creating bike boulevards are endless, and you can check out the many design recommendations from NACTO’s Urban Bikeway Design Guide here. Many of the elements of bike boulevards can be accomplished using existing barricades, and the other elements can be implemented with very simple and inexpensive infrastructure, such as signs and pavement markings.

Example of an existing street barrier that allows bike traffic through near Washington Blvd and Des Peres Ave. While this intersection uses a paved bikeway to allow through access to people on bikes, the same thing could be accomplished with properly spaced Schoemehl pots, concrete balls, or other barriers.

Possible Bike Boulevard Routes

In my grad school project, I combined the Schoemehl pot bike boulevard idea with my own proposed extension of the planned greenway on the old Hodiamont streetcar right-of-way to create a cross-town walking and biking path (this is now more or less part of the plan for the Brickline Greenway). The greenway would be a great addition to the city on its own, but I thought it would be much more useful as an actual transportation route if people could reach it safely and comfortably on foot or by bike from surrounding neighborhoods. So I threw a bunch of possible bike boulevard routes on the map in adjacent neighborhoods, making use of existing street barriers whenever possible. It is not a fully fleshed out plan by any means, but the results are pictured below.

Map of possible bike boulevards (red lines) connecting adjacent neighborhoods to a planned greenway and proposed extension. Bike boulevard routes shown on the map make use of existing street barriers whenever possible. Other mapped bike lanes and greenways represent existing infrastructure.

As you can see, strategically reworking existing street barriers into a bike boulevard network can greatly increase opportunities for safe and comfortable bicycling. Because a key design feature of bike boulevards is low traffic speeds and volumes, a system of bike boulevards would also make neighborhood streets safer and more inviting for people walking and using wheelchairs or other mobility devices.

To create a cohesive bike boulevard network, only some of the routes on the map above would be necessary. And since existing barricades are not equally distributed around the city, new barriers would need to be installed and/or existing barriers relocated in order to create a city-wide bike boulevard network. Any barriers that are not needed for the bike boulevards could be removed to restore some of the city’s street connectivity.

This is all very much possible with a surprisingly small budget. Compared to other types of bicycle infrastructure, bike boulevards are very inexpensive. The city of Berkeley, CA, has one of the most successful examples of a bike boulevard system, and to date, it has spent only $330,000 on implementation (and that was without the advantage of already having Schoemehl pots on the ground). By comparison, a typical separated or protected bike lane will usually cost between $300k and $1 million per mile. While this more expensive type of bike infrastructure is absolutely justified on high speed, high volume roads, it is not feasible or even necessary on every street.

Berkeley’s highly successful bike boulevard system.

Using the city’s existing street barriers to create bike boulevards would not get around every concern about street connectivity for vehicles, but it would strategically use simple design and affordable infrastructure to make streets safer and more accessible for people walking and biking. It would also help address equity, health, and environmental concerns by making transportation by bicycle a viable and dignified option throughout the city. A coordinated effort led by the city would be necessary to implement Schoemehl pot bike boulevards, and it would likely require putting an end to the haphazard placement of street barriers at the whims of alderpeople. But the benefits to the city would be immense and St. Louis would position itself as a national leader in active transportation and street safety.

Let's block ads! (Why?)



"street" - Google News
January 17, 2021 at 08:01PM
https://ift.tt/3qrGj4F

Street Barricades: Urban Scourge or Opportunity for a Bikeable St. Louis? - nextstl.com
"street" - Google News
https://ift.tt/2Ql4mmJ
Shoes Man Tutorial
Pos News Update
Meme Update
Korean Entertainment News
Japan News Update

No comments:

Post a Comment

Search

Featured Post

5 Negara yang Terkenal akan Street Food Nikmat Mereka - IDN Times

Berwisata ke luar negeri tak lengkap rasanya jika tidak mencoba berbagai hal yang khas dari negara tersebut. Mulai dari tempat wisata , b...

Postingan Populer